173d www.vishay.com vishay sprague revision: 05-apr-12 1 document number: 40019 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 solid-electrolyte t antalex ? capacitors, axial-leaded, molded case features ? axial through-hole terminations: tin/lead (snpb), 100 % tin (rohs-compliant) ? miniature axial-lead ca pacitors available in 5 sizes ? precision molded in gold colored, flame retardant, thermosetting epoxy resin ? laser marked for improved legibility and tapered end of case provides easy identification of positive terminal ? standard orders are lead taped and reeled; orders under 500 are taped only ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note * lead (pb)-containing terminations are not rohs-compliant. exemptions may apply. applications designed for high performanc e automotive, industrial and commercial electronic equipment. performance characteristics operating temperature: - 55 c to + 85 c (to + 125 c with voltage derating) capacitance tolerance: at 120 hz, + 25 c. 20 %, 10 % standard 5 % available as special capacitance range: 0.10f to 330 f. voltage rating: 2 v dc to 50 v dc . dissipation factor: at 120 hz, + 25 c. dissipation factor, as determined from the expression 2 ? frc, shall not exceed the values listed in th e standard ratings table. dc leakage current (dcl max.): at + 25 c: leakage current shall not exceed the values listed in the standard ratings table. at + 85 c: leakage current shall not exceed 10 times the values listed in the standard ratings table. at + 125 c: leakage shall not exceed 15 times the values listed in the standard ratings table. life test: capacitors shall with stand rated dc voltage applied at + 85 c for 2000 h and for 1000 h applied at + 25 c derated voltage. following the life test: 1. dcl shall not exceed 125 % of the initial requirements. 2. dissipation factor shall meet the initial requirement. 3. change in capacitance shall not exceed 10 %. ordering information 173d 335 x9 006 u w e3 model capacitance capacitance tolerance dc voltage rating at + 85 c case code packaging rohs compliant this is expresse d in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. x0 = 20 % x9 = 10 % *x5 = 5 % * special order this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. see ratings and case codes table w = tape and reel blank = ammo pack e3 = 100 % tin termination (rohs compliant) blank = snpb termination dimensions in inches [millimeters] case code d (max.) l (max.) lead diameter u 0.095 [2.41] 0.260 [6.60] 0.020 [0.51] v 0.110 [2.79] 0.290 [7.37] 0.020 [0.51] w 0.180 [4.57] 0.345 [8.76] 0.020 [0.51] x 0.180 [4.57] 0.420 [10.67] 0.020 [0.51] y 0.280 [7.11] 0.550 [13.97] 0.025 [0.64] (-) (+) 0.875 [22.23] l d 0.875 [22.23] tinned solid leads tapered end identifies anode max. max. min. min.
173d www.vishay.com vishay sprague revision: 05-apr-12 2 document number: 40019 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and case codes f 2 v 4 v 6 v 10 v 15 v 20 v 25 v 35 v 50 v 0.10 uu 0.12 uu 0.15 uu 0.18 uu 0.22 uu 0.27 uu 0.33 uv 0.39 uv 0.47 uuv 0.56 uvv 0.68 uvv 0.82 uvv 1.0 u u u v v 1.2 uvvw 1.5 u u v v w 1.8 u v v w w 2.2 u u u/v v w w 2.7 u v v v w x 3.3 u u v v v w x 3.9 u v v v w w x 4.7 u u v v v w w x 5.6 u v v v w w x y 6.8 u u v v v w w x y 8.2uvvvwwwxy 10uvvvwwwxy 12 v v v w w x x y y 15 v v v w w x x y y 18 v v w w x x y y y 22 v v w w x x y y y 27 v w w x x y y y 33 v w w x x y y y 39ww x xyyyy 47ww x xyyyy 56 w x x y y y 68 w x x y y y 82 y y y y 100 y y y y 120 y y y 150 y y y 180 y y 220 y y 270 y 330 y
173d www.vishay.com vishay sprague revision: 05-apr-12 3 document number: 40019 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) on big case sizes (w,x,y) lead free indicator is printed after date code, for example 1209l. marking parameter example product type 173d polarity + capacitance code, pf 156 capacitance tolerance code k voltage 25 v date code 1209 lead (pb)-free indicator (1) l sprague logo 2 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) 2 v dc at + 85 c, surge = 2.5 v; 1.5 v dc at + 125 c, surge = 1.8 v 6.8 u 173d685(1)002u(2)(3) 0.5 10 8.2 u 173d825(1)002u(2)(3) 0.5 10 10 u 173d106(1)002u(2)(3) 0.5 10 12 v 173d126(1)002v(2)(3) 0.5 10 15 v 173d156(1)002v(2)(3) 0.5 10 18 v 173d186(1)002v(2)(3) 0.5 10 22 v 173d226(1)002v(2)(3) 0.5 10 27 v 173d276(1)002v(2)(3) 0.5 10 33 v 173d336(1)002v(2)(3) 0.5 10 39 w 173d396(1)002w(2)(3) 0.6 10 47 w 173d476(1)002w(2)(3) 0.8 10 56 w 173d566(1)002w(2)(3) 0.9 10 68 w 173d686(1)002w(2)(3) 1.1 10 4 v dc at + 85 c, surge = 5 v; 2.5 v dc at + 125 c, surge = 3 v 4.7 u 173d475(1)004u(2)(3) 0.5 8 5.6 u 173d565(1)004u(2)(3) 0.5 8 6.8 u 173d685(1)004u(2)(3) 0.5 8 8.2 v 173d825(1)004v(2)(3) 0.5 8 10 v 173d106(1)004v(2)(3) 0.5 8 12 v 173d126(1)004v(2)(3) 0.5 8 15 v 173d156(1)004v(2)(3) 0.5 8 18 v 173d186(1)004v(2)(3) 0.6 8 22 v 173d226(1)004v(2)(3) 0.7 8 27 w 173d276(1)004w(2)(3) 0.9 8 33 w 173d336(1)004w(2)(3) 1.1 8 39 w 173d396(1)004w(2)(3) 1.2 8 47 w 173d476(1)004w(2)(3) 1.5 8 56 x 173d566(1)004x(2)(3) 1.5 8 68 x 173d686(1)004x(2)(3) 2.2 8 note ? part number definition: (1) for 10 % tolerance specify x 9; for 20 % specify x0; for 5 % specify x5 (special order) (2) packaging code: for reel 13" specify w, leave blank for ammo pack (3) termination: for 100 % tin sp ecify e3, for snpb leave blank
173d www.vishay.com vishay sprague revision: 05-apr-12 4 document number: 40019 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 6 v dc at + 85 c, surge = 8 v; 4 v dc at + 125 c, surge = 5 v 3.3 u 173d335(1)006u(2)(3) 0.5 4 3.9 u 173d395(1)006u(2)(3) 0.5 4 4.7 u 173d475(1)006u(2)(3) 0.5 4 5.6 v 173d565(1)006v(2)(3) 0.5 4 6.8 v 173d685(1)006v(2)(3) 0.5 6 8.2 v 173d825(1)006v(2)(3) 0.5 6 10 v 173d106(1)006v(2)(3) 0.5 6 12 v 173d126(1)006v(2)(3) 0.6 6 15 v 173d156(1)006v(2)(3) 0.7 6 18 w 173d186(1)006w(2)(3) 0.9 6 22 w 173d226(1)006w(2)(3) 1.1 6 27 w 173d276(1)006w(2)(3) 1.3 6 33 w 173d336(1)006w(2)(3) 1.5 6 39 x 173d396(1)006x(2)(3) 1.6 6 47 x 173d476(1)006x(2)(3) 2.3 6 56 x 173d566(1)006x(2)(3) 2.7 6 68 x 173d686(1)006x(2)(3) 3.3 6 82 y 173d826(1)006y(2)(3) 3.9 8 100 y 173d107(1)006y(2)(3) 4.8 8 120 y 173d127(1)006y(2)(3) 5.0 8 150 y 173d157(1)006y(2)(3) 5.0 8 180 y 173d187(1)006y(2)(3) 8.6 8 220 y 173d227(1)006y(2)(3) 10.0 8 270 y 173d277(1)006y(2)(3) 10.0 8 330 y 173d337(1)006y(2)(3) 10.0 8 10 v dc at + 85 c, surge = 13 v; 7 v dc at + 125 c, surge = 9 v 2.2 u 173d225(1)010u(2)(3) 0.5 4 2.7 u 173d275(1)010u(2)(3) 0.5 4 3.3 u 173d335(1)010u(2)(3) 0.5 4 3.9 v 173d395(1)010v(2)(3) 0.5 4 4.7 v 173d475(1)010v(2)(3) 0.5 4 5.6 v 173d565(1)010v(2)(3) 0.5 4 6.8 v 173d685(1)010v(2)(3) 0.5 6 8.2 v 173d825(1)010v(2)(3) 0.7 6 10 v 173d106(1)010v(2)(3) 0.8 6 12 w 173d126(1)010w(2)(3) 1.0 6 15 w 173d156(1)010w(2)(3) 1.2 6 18 w 173d186(1)010w(2)(3) 1.4 6 22 w 173d226(1)010w(2)(3) 1.5 6 27 x 173d276(1)010x(2)(3) 2.2 6 33 x 173d336(1)010x(2)(3) 2.6 6 39 x 173d396(1)010x(2)(3) 3.1 6 47 x 173d476(1)010x(2)(3) 3.8 6 56 y 173d566(1)010y(2)(3) 4.4 6 68 y 173d686(1)010y(2)(3) 5.0 6 82 y 173d826(1)010y(2)(3) 5.0 8 100 y 173d107(1)010y(2)(3) 8.0 8 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) note ? part number definition: (1) for 10 % tolerance specify x 9; for 20 % specify x0; for 5 % specify x5 (special order) (2) packaging code: for reel 13" specify w, leave blank for ammo pack (3) termination: for 100 % tin sp ecify e3, for snpb leave blank
173d www.vishay.com vishay sprague revision: 05-apr-12 5 document number: 40019 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 10 v dc at + 85 c, surge = 13 v; 7 v dc at + 125 c, surge = 9 v 120 y 173d127(1)010y(2)(3) 9.6 8 150 y 173d157(1)010y(2)(3) 10.0 8 180 y 173d187(1)010y(2)(3) 10.0 8 220 y 173d227(1)010y(2)(3) 10.0 8 15 v dc at + 85 c, surge = 20 v; 10 v dc at + 125 c, surge = 12 v 1.0 u 173d105(1)015u(2)(3) 0.5 4 1.5 u 173d155(1)015u(2)(3) 0.5 4 1.8 u 173d185(1)015u(2)(3) 0.5 4 2.2 u 173d225(1)015u(2)(3) 0.5 4 2.7 v 173d275(1)015v(2)(3) 0.5 4 3.3 v 173d335(1)015v(2)(3) 0.5 4 3.9 v 173d395(1)015v(2)(3) 0.5 4 4.7 v 173d475(1)015v(2)(3) 0.6 4 5.6 v 173d565(1)015v(2)(3) 0.7 4 6.8 v 173d685(1)015v(2)(3) 0.8 6 8.2 w 173d825(1)015w(2)(3) 1.0 6 10 w 173d106(1)015w(2)(3) 1.2 6 12 w 173d126(1)015w(2)(3) 1.4 6 15 w 173d156(1)015w(2)(3) 1.5 6 18 x 173d186(1)015x(2)(3) 2.2 6 22 x 173d226(1)015x(2)(3) 2.6 6 27 x 173d276(1)015x(2)(3) 3.2 6 33 x 173d336(1)015x(2)(3) 4.0 6 39 y 173d396(1)015y(2)(3) 4.7 6 47 y 173d476(1)015y(2)(3) 5.0 6 56 y 173d566(1)015y(2)(3) 6.7 6 68 y 173d686(1)015y(2)(3) 8.2 6 82 y 173d826(1)015y(2)(3) 9.8 8 100 y 173d107(1)015y(2)(3) 10.0 8 120 y 173d127(1)015y(2)(3) 10.0 8 150 y 173d157(1)015y(2)(3) 10.0 8 20 v dc at + 85 c, surge = 26 v; 13 v dc at + 125 c, surge = 16 v 1.0 u 173d105(1)020u(2)(3) 0.5 4 1.2 u 173d125(1)020u(2)(3) 0.5 4 1.5 u 173d155(1)020u(2)(3) 0.5 4 1.8 v 173d185(1)020v(2)(3) 0.5 4 2.2 u 173d225(1)020u(2)(3) 0.5 4 2.2 v 173d225(1)020v(2)(3) 0.5 4 2.7 v 173d275(1)020v(2)(3) 0.5 4 3.3 v 173d335(1)020v(2)(3) 0.5 4 3.9 v 173d395(1)020v(2)(3) 0.6 4 4.7 v 173d475(1)020v(2)(3) 0.8 4 5.6 w 173d565(1)020w(2)(3) 0.9 4 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) note ? part number definition: (1) for 10 % tolerance specify x 9; for 20 % specify x0; for 5 % specify x5 (special order) (2) packaging code: for reel 13" specify w, leave blank for ammo pack (3) termination: for 100 % tin sp ecify e3, for snpb leave blank
173d www.vishay.com vishay sprague revision: 05-apr-12 6 document number: 40019 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 20 v dc at + 85 c, surge = 26 v; 13 v dc at + 125 c, surge = 16 v 6.8 w 173d685(1)020w(2)(3) 1.1 6 8.2 w 173d825(1)020w(2)(3) 1.3 6 10 w 173d106(1)020w(2)(3) 1.6 6 12 x 173d126(1)020x(2)(3) 1.9 6 15 x 173d156(1)020x(2)(3) 2.4 6 18 x 173d186(1)020x(2)(3) 2.9 6 22 x 173d226(1)020x(2)(3) 3.5 6 27 y 173d276(1)020y(2)(3) 4.3 6 33 y 173d336(1)020y(2)(3) 5.0 6 39 y 173d396(1)020y(2)(3) 6.2 6 47 y 173d476(1)020y(2)(3) 7.5 6 56 y 173d566(1)020y(2)(3) 8.9 6 68 y 173d686(1)020y(2)(3) 10.0 6 82 y 173d826(1)020y(2)(3) 10.0 6 100 y 173d107(1)020y(2)(3) 10.0 6 25 v dc at + 85 c, surge = 32 v; 17 v dc at + 125 c, surge = 21 v 0.47 u 173d474(1)025u(2)(3) 0.5 3 0.56 u 173d564(1)025u(2)(3) 0.5 3 0.68 u 173d684(1)025u(2)(3) 0.5 3 0.82 u 173d824(1)025u(2)(3) 0.5 3 1.0 u 173d105(1)025u(2)(3) 0.5 3 1.2 v 173d125(1)025v(2)(3) 0.5 3 1.5 v 173d155(1)025v(2)(3) 0.5 3 1.8 v 173d185(1)025v(2)(3) 0.5 3 2.2 v 173d225(1)025v(2)(3) 0.5 3 2.7 v 173d275(1)025v(2)(3) 0.5 3 3.3 v 173d335(1)025v(2)(3) 0.7 3 3.9 w 173d395(1)025w(2)(3) 0.8 3 4.7 w 173d475(1)025w(2)(3) 0.9 4 5.6 w 173d565(1)025w(2)(3) 1.1 4 6.8 w 173d685(1)025w(2)(3) 1.4 4 8.2 w 173d825(1)025w(2)(3) 1.5 4 10 w 173d106(1)025w(2)(3) 1.5 4 12 x 173d126(1)025x(2)(3) 2.4 4 15 x 173d156(1)025x(2)(3) 3.0 4 18 y 173d186(1)025y(2)(3) 3.6 6 22 y 173d226(1)025y(2)(3) 4.4 6 27 y 173d276(1)025y(2)(3) 5.4 6 33 y 173d336(1)025y(2)(3) 6.6 6 39 y 173d396(1)025y(2)(3) 7.8 6 47 y 173d476(1)025y(2)(3) 9.4 6 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) note ? part number definition: (1) for 10 % tolerance specify x 9; for 20 % specify x0; for 5 % specify x5 (special order) (2) packaging code: for reel 13" specify w, leave blank for ammo pack (3) termination: for 100 % tin sp ecify e3, for snpb leave blank
173d www.vishay.com vishay sprague revision: 05-apr-12 7 document number: 40019 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 35 v dc at + 85 c, surge = 46 v; 23 v dc at + 125 c, surge = 28 v 0.10 u 173d104(1)035u(2)(3) 0.5 3 0.12 u 173d124(1)035u(2)(3) 0.5 3 0.15 u 173d154(1)035u(2)(3) 0.5 3 0.18 u 173d184(1)035u(2)(3) 0.5 3 0.22 u 173d224(1)035u(2)(3) 0.5 3 0.27 u 173d274(1)035u(2)(3) 0.5 3 0.33 u 173d334(1)035u(2)(3) 0.5 3 0.39 u 173d394(1)035u(2)(3) 0.5 3 0.47 u 173d474(1)035u(2)(3) 0.5 3 0.56 v 173d564(1)035v(2)(3) 0.5 3 0.68 v 173d684(1)035v(2)(3) 0.5 3 0.82 v 173d824(1)035v(2)(3) 0.5 3 1.0 v 173d105(1)035v(2)(3) 0.5 3 1.2 v 173d125(1)035v(2)(3) 0.5 3 1.5 v 173d155(1)035v(2)(3) 0.5 3 1.8 w 173d185(1)035w(2)(3) 0.5 3 2.2 w 173d225(1)035w(2)(3) 0.6 3 2.7 w 173d275(1)035w(2)(3) 0.8 3 3.3 w 173d335(1)035w(2)(3) 0.9 4 3.9 w 173d395(1)035w(2)(3) 1.1 4 4.7 w 173d475(1)035w(2)(3) 1.3 4 5.6 x 173d565(1)035x(2)(3) 1.6 4 6.8 x 173d685(1)035x(2)(3) 1.9 4 8.2 x 173d825(1)035x(2)(3) 2.3 4 10 x 173d106(1)035x(2)(3) 2.8 4 12 y 173d126(1)035y(2)(3) 3.3 4 15 y 173d156(1)035y(2)(3) 4.2 4 18 y 173d186(1)035y(2)(3) 5.0 6 22 y 173d226(1)035y(2)(3) 6.2 6 27 y 173d276(1)035y(2)(3) 7.5 6 33 y 173d336(1)035y(2)(3) 9.2 6 39 y 173d396(1)035y(2)(3) 10.0 6 47 y 173d476(1)035y(2)(3) 10.0 6 50 v dc at + 85 c, surge = 65 v; 33 v dc at + 125 c, surge = 40 v 0.10 u 173d104(1)050u(2)(3) 0.5 3 0.12 u 173d124(1)050u(2)(3) 0.5 3 0.15 u 173d154(1)050u(2)(3) 0.5 3 0.18 u 173d184(1)050u(2)(3) 0.5 3 0.22 u 173d224(1)050u(2)(3) 0.5 3 0.27 u 173d274(1)050u(2)(3) 0.5 3 0.33 v 173d334(1)050v(2)(3) 0.5 3 0.39 v 173d394(1)050v(2)(3) 0.5 3 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) note ? part number definition: (1) for 10 % tolerance specify x 9; for 20 % specify x0; for 5 % specify x5 (special order) (2) packaging code: for reel 13" specify w, leave blank for ammo pack (3) termination: for 100 % tin sp ecify e3, for snpb leave blank
173d www.vishay.com vishay sprague revision: 05-apr-12 8 document number: 40019 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 50 v dc at + 85 c, surge = 65 v; 33 v dc at + 125 c, surge = 40 v 0.47 v 173d474(1)050v(2)(3) 0.5 3 0.56 v 173d564(1)050v(2)(3) 0.5 3 0.68 v 173d684(1)050v(2)(3) 0.5 3 0.82 v 173d824(1)050v(2)(3) 0.5 3 1.0 v 173d105(1)050v(2)(3) 0.5 3 1.2 w 173d125(1)050w(2)(3) 0.5 3 1.5 w 173d155(1)050w(2)(3) 0.6 3 1.8 w 173d185(1)050w(2)(3) 0.7 4 2.2 w 173d225(1)050w(2)(3) 0.9 4 2.7 x 173d275(1)050x(2)(3) 1.1 4 3.3 x 173d335(1)050x(2)(3) 1.3 4 3.9 x 173d395(1)050x(2)(3) 1.6 4 4.7 x 173d475(1)050x(2)(3) 1.9 4 5.6 y 173d565(1)050y(2)(3) 2.2 4 6.8 y 173d685(1)050y(2)(3) 2.7 4 8.2 y 173d825(1)050y(2)(3) 3.2 4 10 y 173d106(1)050y(2)(3) 4.0 6 12 y 173d126(1)050y(2)(3) 5.0 6 15 y 173d156(1)050y(2)(3) 6.0 6 18 y 173d186(1)050y(2)(3) 6.0 6 22 y 173d226(1)050y(2)(3) 11.0 6 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) note ? part number definition: (1) for 10 % tolerance specify x 9; for 20 % specify x0; for 5 % specify x5 (special order) (2) packaging code: for reel 13" specify w, leave blank for ammo pack (3) termination: for 100 % tin sp ecify e3, for snpb leave blank tape and reel packaging in inches [millimeters] case code units per reel component spacing tape spacing units per ammopack ab u 4500 0.200 0.015 [5.08 3.81] 2.062 0.062 [52.37 1.57] 1000 v 4000 w, x 2500 500 y 500 0.400 0.015 a a 0.750 [19.05] c (1.b) s ection a - a 0.250 [6.35] (3.b) component overall length (1.b) a 0.031 [0.79] (3.f) (both s ide s ) (3.f) (1.a) 0.047 [1.19] max. off center (1.a) 0.125 [3.18] max. b tape s pacing component s pacing (4.b) 13 [330.2] dia. s tandard reel 1.126 to 3.07 [28.6 to 78.0] i. d. reel hub 0.625 0.062 [15.88 1.57] dia. thru hole label (4.a) 1.374 to 3.626 [34.9 to 92.1]
173d www.vishay.com vishay sprague revision: 05-apr-12 9 document number: 40019 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 standard reel packaging information 1. component leads a. component leads shall not be bent beyond 0.047" [1.19 mm] maximum from their nominal position when measured from the leading edge of the component lead at the inside tape edge and at the lead egress from the component. b. the c dimension shall be governed by the overall length of the reel packaged component. the distance between flanges shall be 0. 125" to 0.250" [3.18 mm to 6.35 mm] greater than the overall component length. 2. orientation all polarized components must be oriented to one direction. the cathode lead tape shall be a color and the anode lead tape shall be white. 3. reeling a. components on any reel sh all not represent more than two date codes when date code identification is required. b. component leads shall be positioned between pairs of 0.250" [6.35 mm] tape. c. the disposable reels have hubs and corrugated fibreboard flanges and core. d. a minimum of 12" [304.8 mm ] leader of tape shall be provided before the first an d after the last component on the reel. e. 50 lb to 60 lb. kraft paper must be wound between layers of components as far as necessary for component protection. width of paper to be 0.062" to 0.250" [1.57 mm to 6.35 mm] less than the c dimension of the reel. f. row components must be centered between tapes 0.047" [1.19 mm]. in addi tion, individu al components may deviate from center of component row 0.031" [0.79 mm]. g. staples shall not be used for splicing. not more than 4 layers of tape shall be us ed in any splice area and no tape shall be offset from another by more than 0.031" [0.79 mm] non-cumulative. tape splices shall overlap at least 6.0" [152.4 mm] for butt joints and at least 3" [76.2 mm] for lap joints and shall not be weaker than unspliced tape. universal splicing clips may also be used. h. quantity per reel shall be controlled so that tape components and cover shall not extend beyond the smallest dimension of the fl ange (either across flats or diameter). once the quanti ty per reel for each part number has been established, future orders for that part number shall be packaged in that quantity. when order release quantity is less than the established quantity, a standard commercial pack is to be used. i. a maximum of 0.25 % of the components per reel quantity may be missing without consecutive missing components. j. adequate protection must be provided to prevent physical damage to both reel and components during shipment and storage product information mounting of through hole components www.vishay.com/doc?40108 selector guides quick reference guide www.vishay.com/doc?40037 selector guide www.vishay.com/doc?49054 parameter comparison guide www.vishay.com/doc?40033 faq frequently asked questions www.vishay.com/doc?40110
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
